 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 1 OF 8 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Features Package: 1.6x0.8x0.6mm(0603) standard package Feature of the device: extremely wide viewing angle ; ideal for backlighting and coupling in light guides Wavelength: 570nm(Yellow Green) Viewing angle: Extremely Wide( 120) Grouping parameter: luminous intensity Assembly methods: suitable for all SMT assembly methods Soldering methods: IR reflow soldering Taping: Package in 8mm tape on 7" diameter reel Package Dimensions Applications Automotive : Dashboards , stop lamps , turn signals Backlighting : LCDs , Key pads , advertising Status indicators : Comsumer , Key pads , advertising Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Power Dissipation Peak Forward Current (Duty1/10,t0.1msec) Symbol VR IF Top Tstg Pd IFp Spec 5 30 -25~+80 -30~+85 78 100 Unit V mA mW mA For reflow soldering Notes:Tolerances Unless Dimension 0.1mm,Angle0.5",Unit=mm PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 2 OF 8 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Electro-optical Data (20mA) Vf Iv Material Electro-optical Characteristics at Ta=25 Wavelength (nm) typ Code for parts Lighting color Typ. Max Min Typ. d p Reverse Current IR(uA)@VR=5V KL-191UYG Ultra bright AlInGaP 2.2 2.5 25 50 570 574 20 yellow green 100 The Reliability criteria of SMD LED Item Symbol Test Condition IF=10mA VR=5V IF=10mA Limit Min - - L.S.L*0.7 Max U.S.L*1.2 U.S.L*2.0 - Forward Voltage VF Reverse Current IR Power PO *U.S.L: Upper Standard Level *L.S.L: Lower Standard Level Results of Reliability Test NO 1 2 3 4 5 Item Temperature Cycle High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition H:+100 30min 5min L: -40 30min Temp : 100 Temp : -40 IF: 20mA 60 / 90% RH TestHours/ Cycles Sample Ac / Re NO 0/1 0/1 0/1 0/1 0/1 100CYCES 11 PCS 500HRS 500HRS 500HRS 500HRS 11 PCS 11 PCS 11 PCS 11 PCS PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 REV. 1 SHEET 3 OF 8 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Typical Electro-Optical Characteristics Curves Relative spektrale Emission Irel=f(),Ta=25,IF=10mA V()=Standard eye response curve Yellow Green 100 80 Irel 60 40 20 0 400 450 500 550 600 650 700 Forward Current IF=f(VF),TA=25 Relative Luminous Intensity Iv/Iv(10mA)=f(IF) TA=25 1.6 1.4 1.2 Iv 1.0 0.8 0.6 0.4 0.2 0.0 50 40 IF 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.2 VF 3.6 4.0 Yellow Green 0 10 20 30 IF 40 50 PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 4 OF 8 0 10 20 30 cosmo ELECTRONICS ORPORATION 40 30 IF 25 20 SMD LED : KL191UYG REV. 1 Max. Permissible Forward Current IF=f(Ta) Radiation Characteristic Irel=f() 40 50 60 70 0.9 0 20 40 60 T 80 100 C 1.0 10 80 90 0.7 0.5 0.3 0.1 0.2 0.4 0.6 0.8 0 Method of Taping / Polarity and Orientation Packing unit 3000/reel Unit : mm Direction U: Taping upward Notes: All dimensions are in millimeters (inches) D: Taping downward PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 5 OF 8 REV. 1 cosmo ELECTRONICS ORPORATION SMD LED : KL191UYG Package Dimensions of Reel Unit: mm PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 6 OF 8 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Product lable CUSTOMER: CUSTOMER P/N: DEVICE TYPE: BIN: COLOR RANK: LOT NO: QTY: Packaging CAUTION: After open the aluminum laminate bag the lamps should be storage in the Follow condition Temperautre:5 to 30 ,Humidity:70%,Storage time:72hrs max Backing condition :If backing is necessary , we recommended the backing condition is 60 +/- 5 10hours Packing CUSTOMER: CUSTOMER P/N: DEVICE TYPE: BIN: COLOR RANK: LOT NO: QTY: PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 REV. 1 SHEET 7 OF 8 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Cautions for use Over-current-proof Customer must apply resistors for protection ,others slight voltage shit will cause big current change (Burn out will happen). Storage time The operation of temperature and RH are : 5~35,RH60%. Once the package is opened , the products should be used within a week. Otherwise , they should be kept in a damp proof box with descanting agent. Considering the tape life , we suggest our customers to use our products within a year(from production date) If opened more than one week in an atmosphere 5~35 , RH60% , they should be treated at 60 5 for 15 hrs. COSMO-lnnotek will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user's unit if use to exceed the absolute maximum ratings, or not keep the matters that demand special attention. Others Soldering Heat Reliability Available for Pb free soldering process Please refer to the following figure : 5 sec Temp ( C) 260 230 4 C/s max Preheat 150 120 60~120sec 30~50sec Time PRODUCT SPECIFICATION DATE:05/18/2004 NO. 61L01005 SHEET 8 OF 8 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL191UYG Soldering Iron Basic spec is 5sec when 260. If temperature is higher, time shorter ( +10 -1sec ). Power dissipation of Iron should be smaller than 15W, and temperature should be controllable. Surface temperature of the device should be under 230. Rework Customer must finish rework within 5sec under 245. The head of Iron can not touch copper foil. Twin-head type is preferred. |
Price & Availability of KL191UYG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |